View L7815ABD2T-TR_4579423.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

L78xxAB L78xxAC
Precision 1 A regulators
Features

Output current in excess of 1 A Output voltages of 5; 6; 8; 9; 12; 15; 24 V Thermal overload protection Output transition SOA protection 2 % Output voltage tolerance Guaranteed in extended temperature range
TO-220 TO-220FP
Description
The L78xxAB L78xxAC series of three terminal positive regulators are available in TO-220, TO-220FP, and D2PAK packages and several fixed output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problem associated with single point regulation. Each type employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1 A output current, although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents.
D2PAK
Table 1.
Device summary
Order codes L7805AB L7805AC L7806AB L7806AC L7808AB L7808AC L7809AB L7809AC L7812AB L7812AC L7815AB L7815AC L7824AB L7824AC Rev 17 1/26
www.st.com 26
July 2008
Contents
L78xxAB - L78xxAC
Contents
1 2 3 4 5 6 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Test circuits ............................................... 6
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.1 Design consideration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7 8 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
2/26
L78xxAB - L78xxAC
Diagram
1
Figure 1.
Diagram
Block diagram
Figure 2.
Schematic diagram
3/26
Pin configuration
L78xxAB - L78xxAC
2
Figure 3.
Pin configuration
Pin connections (top view)
TO-220
TO-220FP
D2PAK
4/26
L78xxAB - L78xxAC
Maximum ratings
3
Table 2.
Symbol VI IO PD TSTG TOP
Maximum ratings
Absolute maximum ratings
Parameter DC input voltage Output current Power dissipation Storage temperature range for L7800AC Operating junction temperature range for L7800AB -40 to 125 for VO= 5 to 18V for VO= 20, 24V Value 35 V 40 Internally limited Internally limited -65 to 150 0 to 150 C mA mW C Unit
Note:
Absolute maximum ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. Thermal data
Parameter Thermal resistance junction-case Thermal resistance junction-ambient TO-220 3 50 TO-220FP 5 60 D2PAK 3 62.5 Unit C/W C/W
Table 3.
Symbol RthJC RthJA
Figure 4.
Application circuit
5/26
Test circuits
L78xxAB - L78xxAC
4
Figure 5.
Test circuits
DC parameter
Figure 6.
Load regulation
Figure 7.
Ripple rejection
6/26
L78xxAB - L78xxAC
Electrical characteristics
5
Table 4.
Symbol VO VO
Electrical characteristics
Electrical characteristics of L7805A (VI = 10 V, IO = 1 A, TJ = 0 to 150 C (L7805AC), TJ = -40 to 125 C (L7805AB), unless otherwise specified)
Parameter Output voltage Output voltage TJ = 25C IO = 5mA to 1A, PO 15W VI = 7.5 to 20V VI = 7.5 to 25V, IO = 500 mA Test conditions Min. 4.9 4.8 Typ. 5 5 7 10 2 7 25 30 8 4.3 Max. 5.1 5.2 50 50 25 50 100 100 50 6 6 VI = 8 to 25V, IO = 500 mA Iq Quiescent current change VI = 7.5 to 20V, TJ = 25C IO = 5mA to 1A SVR Vd eN RO Isc Iscp Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift VI = 8 to 18V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25C TA = 25C, B =10Hz to 100kHz f =1kHz VI = 35V, TA = 25C TJ = 25C 68 2 10 17 0.2 2.2 -1.1 0.8 0.8 0.5 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V V/VO m A A mV/C
VO (1)
Line regulation
VI = 8 to 12V VI = 8 to 12V, TJ = 25C VI = 7.3 to 20V, TJ = 25C IO = 5mA to 1A
VO(*)
Load regulation
IO = 5mA to 1.5A, TJ = 25C IO = 250 to 750mA
Iq
Quiescent current
TJ = 25C
VO/T
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
7/26
Electrical characteristics
L78xxAB - L78xxAC
Table 5.
Symbol VO VO
Electrical characteristics of L7806A (VI = 11 V, IO = 1 A, TJ = 0 to 150 C (L7806AC), TJ = -40 to 125 C (L7806AB), unless otherwise specified)
Parameter Output voltage Output voltage TJ = 25C IO = 5mA to 1A, PO 15W VI = 8.6 to 21V VI = 8.6 to 25V, IO = 500 mA Test conditions Min. 5.88 5.76 Typ. 6 6 9 11 3 9 25 30 10 4.3 Max. 6.12 6.24 60 60 30 60 100 100 50 6 6 VI = 9 to 25V, IO = 500 mA 0.8 0.8 0.5 65 2 10 17 0.2 2.2 -0.8 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V V/VO m A A mV/C
VO (1)
Line regulation
VI = 9 to 13V VI = 9 to 13V, TJ = 25C VI = 8.3 to 21V, TJ = 25C IO = 5mA to 1A
VO
(1)
Load regulation
IO = 5mA to 1.5A, TJ = 25C IO = 250 to 750mA
Iq
Quiescent current
TJ = 25C
Iq
Quiescent current change
VI = 8.6 to 21V, TJ = 25C IO = 5mA to 1A
SVR Vd eN RO Isc Iscp VO/T
Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift
VI = 9 to 19V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25C TA = 25C, B =10Hz to 100kHz f =1kHz VI = 35V, TA = 25C TJ = 25C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
8/26
L78xxAB - L78xxAC
Electrical characteristics
Table 6.
Symbol VO VO
Electrical characteristics of L7808A (VI = 14 V, IO = 1 A, TJ = 0 to 150 C (L7808AC), TJ = -40 to 125 C (L7808AB), unless otherwise specified)
Parameter Output voltage Output voltage TJ = 25C IO = 5mA to 1A, PO 15W VI = 10.6 to 23V VI = 10.6 to 25V, IO = 500 mA Test conditions Min. 7.84 7.7 Typ. 8 8 12 15 5 12 25 30 10 4.3 Max. 8.16 8.3 80 80 40 80 100 100 50 6 6 VI = 11 to 25V, IO = 500 mA 0.8 0.8 0.5 62 2 10 18 0.2 2.2 -0.8 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V V/VO m A A mV/C
VO (1)
Line regulation
VI = 11 to 17V VI = 11 to 17V, TJ = 25C VI = 10.4 to 23V, TJ = 25C IO = 5mA to 1A
VO
(1)
Load regulation
IO = 5mA to 1.5A, TJ = 25C IO = 250 to 750mA
Iq
Quiescent current
TJ = 25C
Iq
Quiescent current change
VI = 10.6 to 23V, TJ = 25C IO = 5mA to 1A
SVR Vd eN RO Isc Iscp VO/T
Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift
VI = 11.5 to 21.5V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25C TA = 25C, B =10Hz to 100kHz f =1kHz VI = 35V, TA = 25C TJ = 25C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
9/26
Electrical characteristics
L78xxAB - L78xxAC
Table 7.
Symbol VO VO
Electrical characteristics of L7809A (VI = 15 V, IO = 1 A, TJ = 0 to 150 C (L7809AC), TJ = -40 to 125 C (L7809AB), unless otherwise specified)
Parameter Output voltage Output voltage TJ = 25C IO = 5mA to 1A, PO 15W VI = 10.6 to 23V VI = 10.6 to 25V, IO = 500 mA Test conditions Min. 8.82 8.65 Typ. 9 9 12 15 5 12 25 30 10 4.3 Max. 9.18 9.35 90 90 45 90 100 100 50 6 6 VI = 11 to 25V, IO = 500 mA 0.8 0.8 0.5 61 2 10 18 0.2 2.2 -0.8 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V V/VO m A A mV/C
VO (1)
Line regulation
VI = 11 to 17V VI = 11 to 17V, TJ = 25C VI = 10.4 to 23V, TJ = 25C IO = 5mA to 1A
VO
(1)
Load regulation
IO = 5mA to 1.5A, TJ = 25C IO = 250 to 750mA
Iq
Quiescent current
TJ = 25C
Iq
Quiescent current change
VI = 10.6 to 23V, TJ = 25C IO = 5mA to 1A
SVR Vd eN RO Isc Iscp VO/T
Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift
VI = 11.5 to 21.5V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25C TA = 25C, B =10Hz to 100kHz f =1kHz VI = 35V, TA = 25C TJ = 25C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
10/26
L78xxAB - L78xxAC
Electrical characteristics
Table 8.
Symbol VO VO
Electrical characteristics of L7812A (VI = 19 V, IO = 1 A, TJ = 0 to 150 C (L7812AC), TJ = -40 to 125 C (L7812AB), unless otherwise specified)
Parameter Output voltage Output voltage TJ = 25C IO = 5mA to 1A, PO 15W VI = 14.8 to 27V VI = 14.8 to 30V, IO = 500 mA Test conditions Min. 11.75 11.5 Typ. 12 12 13 16 6 13 25 30 10 4.4 Max. 12.25 12.5 120 120 60 120 100 100 50 6 6 VI = 15 to 30V, IO = 500 mA 0.8 0.8 0.5 60 2 10 18 0.2 2.2 -1 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V V/VO m A A mV/C
VO (1)
Line regulation
VI = 16 to 12V VI = 16 to 12V, TJ = 25C VI = 14.5 to 27V, TJ = 25C IO = 5mA to 1A
VO
(1)
Load regulation
IO = 5mA to 1.5A, TJ = 25C IO = 250 to 750mA
Iq
Quiescent current
TJ = 25C
Iq
Quiescent current change
VI = 14.8 to 27V, TJ = 25C IO = 5mA to 1A
SVR Vd eN RO Isc Iscp VO/T
Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift
VI = 15 to 25V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25C TA = 25C, B =10Hz to 100kHz f =1kHz VI = 35V, TA = 25C TJ = 25C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
11/26
Electrical characteristics
L78xxAB - L78xxAC
Table 9.
Symbol VO VO
Electrical characteristics of L7815A (VI = 23 V, IO = 1 A, TJ = 0 to 150 C (L7815AC), TJ = -40 to 125 C (L7815AB), unless otherwise specified)
Parameter Output voltage Output voltage TJ = 25C IO = 5mA to 1A, PO 15W VI = 17.9 to 30V VI = 17.9 to 30V, IO = 500 mA Test conditions Min. 14.7 14.4 Typ. 15 15 13 16 6 13 25 30 10 4.4 Max. 15.3 15.6 150 150 75 150 100 100 50 6 6 VI = 17.5 to 30V, IO = 500 mA 0.8 0.8 0.5 58 2 10 19 0.2 2.2 -1 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V V/VO m A A mV/C
VO (1)
Line regulation
VI = 20 to 26V VI = 20 to 26V, TJ = 25C VI = 17.5 to 30V, TJ = 25C IO = 5mA to 1A
VO
(1)
Load regulation
IO = 5mA to 1.5A, TJ = 25C IO = 250 to 750mA
Iq
Quiescent current
TJ = 25C
Iq
Quiescent current change
VI = 17.5 to 30V, TJ = 25C IO = 5mA to 1A
SVR Vd eN RO Isc Iscp VO/T
Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift
VI = 18.5 to 28.5V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25C TA = 25C, B =10Hz to 100kHz f =1kHz VI = 35V, TA = 25C TJ = 25C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
12/26
L78xxAB - L78xxAC
Electrical characteristics
Table 10.
Symbol VO VO
Electrical characteristics of L7824A (VI = 33 V, IO = 1 A, TJ = 0 to 150 C (L7824AC), TJ = -40 to 125 C (L7824AB), unless otherwise specified)
Parameter Output voltage Output voltage TJ = 25C IO = 5mA to 1A, PO 15W VI = 27.3 to 38V VI = 27 to 38V, IO = 500 mA Test conditions Min. 23.5 23 Typ. 24 24 31 35 14 31 25 30 10 4.6 Max. 24.5 25 240 200 120 240 100 100 50 6 6 VI = 27.3 to 38V, IO = 500 mA 0.8 0.8 0.5 54 2 10 20 0.2 2.2 -1.5 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V V/VO m A A mV/C
VO (1)
Line regulation
VI = 30 to 36V VI = 30 to 36V, TJ = 25C VI = 26.7 to 38V, TJ = 25C IO = 5mA to 1A
VO
(1)
Load regulation
IO = 5mA to 1.5A, TJ = 25C IO = 250 to 750mA
Iq
Quiescent current
TJ = 25C
Iq
Quiescent current change
VI = 27.3 to 38V, TJ = 25C IO = 5mA to 1A
SVR Vd eN RO Isc Iscp VO/T
Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift
VI = 28 to 38V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25C TA = 25C, B =10Hz to 100kHz f =1kHz VI = 35V, TA = 25C TJ = 25C
1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used.
13/26
Application information
L78xxAB - L78xxAC
6
6.1
Application information
Design consideration
The L78xxA Series of fixed voltage regulators are designed with Thermal Overload Protection that shuts down the circuit when subjected to an excessive power overload condition, internal short-circuit protection that limits the maximum current the circuit will pass, and output transistor safe-area compensation that reduces the output short-circuit current as the voltage across the pass transistor is increased. In many low current applications, compensation capacitors are not required. However, it is recommended that the regulator input be bypassed with capacitor if the regulator is connected to the power supply filter with long lengths, or if the output load capacitance is large. An input bypass capacitor should be selected to provide good high frequency characteristics to insure stable operation under all load conditions. A 0.33 F or larger tantalum, mylar or other capacitor having low internal impedance at high frequencies should be chosen. The bypass capacitor should be mounted with the shortest possible leads directly across the regulators input terminals. Normally good construction techniques should be used to minimize ground loops and lead resistance drops since the regulator has no external sense lead. The addition of an operational amplifier allows adjustment to higher or intermediate values while retaining regulation characteristics. The minimum voltage obtained with the arrangement is 2 V greater than the regulator voltage. The circuit of figure 6 can be modified to provide supply protection against short circuit by adding a short circuit sense resistor, RSC, and an additional PNP transistor. The current sensing PNP must be able to handle the short circuit current of the three terminal regulator Therefore a four ampere plastic power transistor is specified.
Figure 8.
DC parameter
IO = VXX/R1+Id
14/26
L78xxAB - L78xxAC
Application information
Figure 9.
DC parameter
VO = 7 to 20V VI - VO 2V
Figure 10. DC parameter
VBEQ1 R1 = ______________ IREQ-(IQ1/Q1) VBEQ1 IO = IREG + Q1 (IREG ______) R1
Figure 11. DC parameter
15/26
Package mechanical data
L78xxAB - L78xxAC
7
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
16/26
L78xxAB - L78xxAC
Package mechanical data
TO-220 mechanical data
Dim. A C D D1 E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 DIA. 13.0 2.65 15.25 6.2 3.5 3.75 0.49 0.61 1.14 1.14 4.95 2.4 10.0 16.4 14.0 2.95 15.75 6.6 3.93 3.85 0.511 0.104 0.600 0.244 0.137 0.147 mm. Min. 4.40 1.23 2.40 1.27 0.70 0.88 1.70 1.70 5.15 2.7 10.40 0.019 0.024 0.044 0.044 0.194 0.094 0.393 0.645 0.551 0.116 0.620 0.260 0.154 0.151 Typ. Max. 4.60 1.32 2.72 Min. 0.173 0.048 0.094 0.050 0.027 0.034 0.067 0.067 0.203 0.106 0.409 inch. Typ. Max. 0.181 0.051 0.107
P011C
17/26
Package mechanical data
L78xxAB - L78xxAC
TO-220FP mechanical data
Dim. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 DIA. 28.6 9.8 2.9 15.9 9 3 mm. Min. 4.40 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10.0 16 30.6 10.6 3.6 16.4 9.3 3.2 1.126 0.385 0.114 0.626 0.354 0.118 Typ Max. 4.60 2.7 2.75 0.70 1 1.50 1.50 5.2 2.7 10.40 Min. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.194 0.094 0.393 0.630 1.204 0.417 0.142 0.645 0.366 0.126 inch. Typ. Max. 0.181 0.106 0.108 0.027 0.039 0.059 0.059 0.204 0.106 0.409
7012510A-H
18/26
L78xxAB - L78xxAC
Package mechanical data
Figure 12. Drawing dimension D2PAK (type STD-ST)
0079457/L
19/26
Package mechanical data
L78xxAB - L78xxAC
Figure 13. Drawing dimension D2PAK (type WOOSEOK-Subcon.)
0079457/L
20/26
L78xxAB - L78xxAC
Package mechanical data
Table 11.
D2PAK mechanical data
Type STD-ST Type WOOSEOK-Subcon. mm. Max. 4.60 0.23 0.93 1.70 0.60 1.36 9.35 Min. 4.30 0 0.70 1.17 0.45 1.25 9 7.50 10.40 9.80 7.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 15 2.20 1.79 1 1.20 0.30 3 2.54 5.08 15.30 15.60 2.60 2.79 1.40 1.60 10.20 0.50 1.30 9.20 Typ. Max. 4.70 0.20 0.90 1.37 0.60 1.40 9.40
Dim. Min. A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50
mm. Typ.
Note:
The D2PAK package coming from the subcontractor Wooseok is fully compatible with the ST's package suggested footprint.
21/26
Package mechanical data
L78xxAB - L78xxAC
Figure 14. D2PAK footprint recommended data
Table 12.
Footprint data
Values Dim. A B C D E F G mm. 12.20 9.75 16.90 3.50 1.60 2.54 5.08 inch. 0.480 0.384 0.665 0.138 0.063 0.100 0.200
22/26
L78xxAB - L78xxAC
Package mechanical data
Tape & reel D2PAK-P2PAK-D2PAK/A-P2PAK/A mechanical data
mm. Dim. Min. A C D N T Ao Bo Ko Po P 10.50 15.70 4.80 3.9 11.9 10.6 15.80 4.90 4.0 12.0 12.8 20.2 60 14.4 10.70 15.90 5.00 4.1 12.1 0.413 0.618 0.189 0.153 0.468 0.417 0.622 0.193 0.157 0.472 13.0 Typ. Max. 180 13.2 0.504 0.795 2.362 0.567 0.421 0.626 0.197 0.161 0.476 0.512 Min. Typ. Max. 7.086 0.519 inch.
23/26
Order codes
L78xxAB - L78xxAC
8
Table 13.
Order codes
Order codes
Packaging Part number TO-220 L7805AB L7805AC L7806AB L7806AC L7808AB L7808AC L7809AB L7809AC L7812AB L7812AC L7815AB L7815AC L7824AB L7824AC L7805ABV L7805ACV L7806ABV L7806ACV L7808ABV L7808ACV L7809ABV L7809ACV L7812ABV L7812ACV L7815ABV L7815ACV L7824ABV L7824ACV TO-220FP L7805ABP L7805ACP D2PAK L7805ABD2T-TR L7805ACD2T-TR L7806ABD2T-TR L7806ACD2T-TR L7808ABD2T-TR L7808ACD2T-TR L7809ABD2T-TR L7809ACD2T-TR L7812ABD2T-TR L7812ACD2T-TR L7815ABD2T-TR L7815ACD2T-TR L7824ABD2T-TR Output voltage 5V 5V 6V 6V 8V 8V 9V 9V 12 V 12 V 15 V 15 V 24 V 24 V
24/26
L78xxAB - L78xxAC
Revision history
9
Table 14.
Date
Revision history
Document revision history
Revision 9 10 11 12 13 14 15 16 17 Document updating. Order codes updated and new template. D2PAK mechanical data has been updated and add footprint data. Update figure D2PAK in cover page. Order codes updated. Add Table 1 in cover page. Modified: Table 13. Modified: Table 13 on page 24. Modified: Table 1 on page 1 and Table 13 on page 24. Changes
21-Jun-2004 04-Aug-2006 19-Jan-2007 07-Mar-2007 01-Jun-2007 25-Jul-2007 11-Dec-2007 20-Feb-2008 15-Jul-2008
25/26
L78xxAB - L78xxAC
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
26/26

▲Up To Search▲

Price & Availability of L7815ABD2T-TR

	To Download L7815ABD2T-TR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .